jsb
10-29 01:56 PM
[QUOTE=PDOCT05;189726]It's lawyer's fault ..he didn't check the application clearly.He said he is going to deal with it in a tactical way.I will wait for another notice from USCIS and then will take action on my lawyer. I am not going to leave him..:)
QUOTE]
Wish you all the best. It is too late to learn that one should not leave everything to the lawyers. Accuracy of info, signatures, etc. need to be thoroughly checked by us, the filers. Lawyer is doing this work for several people, and they want to spend least time on each. We, understanding the impact, are prepared to spend little extra time for checking thoroughly.
What tactical explanation is he going to give? May be he should say that it was signed but USCIS guy did not see it. Or, ink was bad, and evaporated, etc. "Fogot" will be difficult to make them accept.
QUOTE]
Wish you all the best. It is too late to learn that one should not leave everything to the lawyers. Accuracy of info, signatures, etc. need to be thoroughly checked by us, the filers. Lawyer is doing this work for several people, and they want to spend least time on each. We, understanding the impact, are prepared to spend little extra time for checking thoroughly.
What tactical explanation is he going to give? May be he should say that it was signed but USCIS guy did not see it. Or, ink was bad, and evaporated, etc. "Fogot" will be difficult to make them accept.
wallpaper desert food web,
iv_only_hope
09-30 03:13 PM
There is some potential good news on the horizon. DHS just published a notice (http://www.regulations.gov/fdmspubli...0000648072c5eb) that they intend to consolidate three of ancient CIS electronic record systems into a new database. Hopefully, this new database will yield the data the Visa Office needs.
Right now, the CIS does not have any comprehensive database that shows how many AOS cases are pending by preference classification, priority date, and country of chargeability. The new database that is supposed to become operational within the next ten days contains information gathered from the many independent CIS databases. Supposedly, this new database will show all of this information.
Once the CIS is able to provide the State Department with this information, the Visa Office will then (for the first time) have accurate information as to the actual demand for immigrant visas. They will then be able to make more accurate adjustments to the cutoff dates in the Visa Bulletin. For some time now, they have been flying blind without accurate information.
CREDIT:RON GOTCHER
Right now, the CIS does not have any comprehensive database that shows how many AOS cases are pending by preference classification, priority date, and country of chargeability. The new database that is supposed to become operational within the next ten days contains information gathered from the many independent CIS databases. Supposedly, this new database will show all of this information.
Once the CIS is able to provide the State Department with this information, the Visa Office will then (for the first time) have accurate information as to the actual demand for immigrant visas. They will then be able to make more accurate adjustments to the cutoff dates in the Visa Bulletin. For some time now, they have been flying blind without accurate information.
CREDIT:RON GOTCHER
bp333
11-13 04:12 PM
Check your private msg
USCIS has accepted my application and we received the receipts today. Thanks to USCIS. They are being lenient.
USCIS has accepted my application and we received the receipts today. Thanks to USCIS. They are being lenient.
2011 Ocean Food Chain Worksheet.
drsilver
July 5th, 2006, 05:27 PM
OK, I've got it all figured out. (I confess, I've got nothing figured out, but it felt good to write that.)
Spent the long weekend reading up on this digital camera stuff and I've decided to go Nikon. Made this decision because I've got a relationship with their systems and some good, old glass that can still be used. Maybe not the best situation with new technology, but certainly not useless.
My quandary now is whether to go with a new D200 or a good used D70. In the past, that would have been an easy decision. When these were the tools of my trade, I was always shooting with one-generation-old technology. When everyone else was shooting with F3s, I used F2s. When the F4 came out, I snatched up a couple of discarded F3s. Made plenty of fine pictures that way.
My concern now is the pace of technology change. Digital photography is in its infancy. One reviewer's opinion is that 1 digital year is about 25 human years. So, 4-year-old digital technology is from the stone age.
Is that really true? It sounds like the D70 is a pretty good, battle-tested box which, over the last few years, has made a ton of perfectly fine images. Is it worth spending twice the money to get the newest and bestest?
One thing that caught my eye is that it sounds like the D200 is quite a bit sturdier than its older brother. I used to beat the snot out of my equipment back in the day, so that was important. Now, probably, not so much. I did read, though, that all the buttons and doors and every possible opening in the D200 is gasket sealed. I live in Seattle, so any camera I own is gonna get rained on. That's a big selling point for me.
I also read that the D200 will also work a little better with my old manual-focus lenses; mainly in the metering department. But neither will let you swap out the viewfinder glass, so I'm stuck with straight ground glass. That was never easy to focus on and my eyes aren't any younger. Guess I'll eventually be investing in at least a few AF lenses.
Tip (or rant, depending on your disposition) Of the Day
(I'm trying to give as much as I take on the board):
As far as camera metering is concerned, it doesn't interest me all that much. If you're at all serious about photography, get yourself a hand-held incident meter. I looked on Ebay yesterday and they're giving them away. You can get a Minolta Autometer IIIF for around $50 or a Flashmeter IV for less than $100. This is the most indispensable piece of equipment I own.
All camera meters are reflective. Personally, I want to know how much light is falling on the bridge of my subject's nose. Skin tones vary tremendously, so I'm not as interested in how much is bouncing back.
No matter how sophisticated a camera's metering system, it's still giving you some kind of a reflective average of some part of the scene. That's usually a good-enough approximation, but it's not exactly what you're looking for. You're better off exposing for the light coming in and letting the reflections take care of themselves. 90% of the time, there will be one part of the scene that you want to expose exactly correctly. The rest can be taken care of by looking in the viewfinder. If there are highlights that are going to blow, move your subject or yourself to an angle that either eliminates them or complements you point of emphasis. When all else fails, you can fix extremes with post-processing.
I've heard folks say that using a hand-held meter is too cumbersome. Takes too much time in fast-moving situations. I call BS. Figuring out whether to use matrix metering or center weighted or 10 or 3 or 1 degree spot or histograms or whatever, then trying to guess what the camera is thinking. That's cumbersome.
I was a photojournalist and shot more than my share of all kinds of action. I always had time to take 5 seconds to get a good incident reading. If you're indoors, walk over and take a reading by your subject. If you're outdoors, stand in light similar to your subject. (No matter how far you are from your subject you're both pretty much the same distance from the sun.)
Anyway, back to my original question. Are there any D70 users out there willing to share their thoughts on this box? Has anyone upgraded to a D200? How did it work out?
Thanks again,
--ken
Spent the long weekend reading up on this digital camera stuff and I've decided to go Nikon. Made this decision because I've got a relationship with their systems and some good, old glass that can still be used. Maybe not the best situation with new technology, but certainly not useless.
My quandary now is whether to go with a new D200 or a good used D70. In the past, that would have been an easy decision. When these were the tools of my trade, I was always shooting with one-generation-old technology. When everyone else was shooting with F3s, I used F2s. When the F4 came out, I snatched up a couple of discarded F3s. Made plenty of fine pictures that way.
My concern now is the pace of technology change. Digital photography is in its infancy. One reviewer's opinion is that 1 digital year is about 25 human years. So, 4-year-old digital technology is from the stone age.
Is that really true? It sounds like the D70 is a pretty good, battle-tested box which, over the last few years, has made a ton of perfectly fine images. Is it worth spending twice the money to get the newest and bestest?
One thing that caught my eye is that it sounds like the D200 is quite a bit sturdier than its older brother. I used to beat the snot out of my equipment back in the day, so that was important. Now, probably, not so much. I did read, though, that all the buttons and doors and every possible opening in the D200 is gasket sealed. I live in Seattle, so any camera I own is gonna get rained on. That's a big selling point for me.
I also read that the D200 will also work a little better with my old manual-focus lenses; mainly in the metering department. But neither will let you swap out the viewfinder glass, so I'm stuck with straight ground glass. That was never easy to focus on and my eyes aren't any younger. Guess I'll eventually be investing in at least a few AF lenses.
Tip (or rant, depending on your disposition) Of the Day
(I'm trying to give as much as I take on the board):
As far as camera metering is concerned, it doesn't interest me all that much. If you're at all serious about photography, get yourself a hand-held incident meter. I looked on Ebay yesterday and they're giving them away. You can get a Minolta Autometer IIIF for around $50 or a Flashmeter IV for less than $100. This is the most indispensable piece of equipment I own.
All camera meters are reflective. Personally, I want to know how much light is falling on the bridge of my subject's nose. Skin tones vary tremendously, so I'm not as interested in how much is bouncing back.
No matter how sophisticated a camera's metering system, it's still giving you some kind of a reflective average of some part of the scene. That's usually a good-enough approximation, but it's not exactly what you're looking for. You're better off exposing for the light coming in and letting the reflections take care of themselves. 90% of the time, there will be one part of the scene that you want to expose exactly correctly. The rest can be taken care of by looking in the viewfinder. If there are highlights that are going to blow, move your subject or yourself to an angle that either eliminates them or complements you point of emphasis. When all else fails, you can fix extremes with post-processing.
I've heard folks say that using a hand-held meter is too cumbersome. Takes too much time in fast-moving situations. I call BS. Figuring out whether to use matrix metering or center weighted or 10 or 3 or 1 degree spot or histograms or whatever, then trying to guess what the camera is thinking. That's cumbersome.
I was a photojournalist and shot more than my share of all kinds of action. I always had time to take 5 seconds to get a good incident reading. If you're indoors, walk over and take a reading by your subject. If you're outdoors, stand in light similar to your subject. (No matter how far you are from your subject you're both pretty much the same distance from the sun.)
Anyway, back to my original question. Are there any D70 users out there willing to share their thoughts on this box? Has anyone upgraded to a D200? How did it work out?
Thanks again,
--ken
more...
calgirl
08-12 06:19 PM
Were these approved at NSC or TSC?
Both are following this rule would be encouraging..
Source:
http://www..com/discussion-forums/i485-1/172162219/
Posted by willcrack (74) 1 hour 51 minutes ago
OK...now guys, strictly speaking the memo does not say anything about "conditional" GC...in legal speak. Just that they could revoke it if the person is considered inadmissable after the Name Check results come back. "Conditional GC" per se has the support of the actual statute only for Married to citizen, EB5 investment GC's etc.
And now for those who feel that USCIS is not approving cases whose NC's are pending, I know 2 of my friends and I whose NC's were pending when the file was with the officer (and approved in a week) and in my case NC was pending even at 6:30pm eastern (when I called the second level IIO at the NCSC) the day before I got the CPO e-mail (next day at 9am).
I have also seen several cases where people have called/went to Infopass after they got the GC to find out whether the NC was cleared....and it was pending !
so this should throw away all apprehensions about the 180+ rule not being implemented out of the window...
Both are following this rule would be encouraging..
Source:
http://www..com/discussion-forums/i485-1/172162219/
Posted by willcrack (74) 1 hour 51 minutes ago
OK...now guys, strictly speaking the memo does not say anything about "conditional" GC...in legal speak. Just that they could revoke it if the person is considered inadmissable after the Name Check results come back. "Conditional GC" per se has the support of the actual statute only for Married to citizen, EB5 investment GC's etc.
And now for those who feel that USCIS is not approving cases whose NC's are pending, I know 2 of my friends and I whose NC's were pending when the file was with the officer (and approved in a week) and in my case NC was pending even at 6:30pm eastern (when I called the second level IIO at the NCSC) the day before I got the CPO e-mail (next day at 9am).
I have also seen several cases where people have called/went to Infopass after they got the GC to find out whether the NC was cleared....and it was pending !
so this should throw away all apprehensions about the 180+ rule not being implemented out of the window...
eb3_nepa
03-25 01:10 PM
Again, I want to point somethingout and that is because I myself work in that field - there are people with MS in Computer Science working in core Systems which require their Masters degree knowledge. So, it is not like IT is not included, people with masters in Computer Science is included in STEM.
Any Master of Science is good enough IF you are working in a related field. Comp science, Information Systems, Electrical Engg etc.
Any Master of Science is good enough IF you are working in a related field. Comp science, Information Systems, Electrical Engg etc.
more...
ksircar
01-26 09:05 AM
Thanks ksircar;
Want to explore on Caribbean options too. However a question is how can we file for Advance Parole as it requires the applicant to be in US at the time of application, otherwise AOS gets invalid. And if at all we choose her to be here for AP application, it would hinder the education.
Thanks
Venu
AP remains valid for one year and you need to apply for AP in such a way so that for AP renewal your daughter will be in US during vacation etc. In the worst case, she has to fly from Caribbean to Miami (or any nearest US port) just to apply for AP and go back. These are the hassels you need to overcome if you want to send your daughter to MED school without a GC. I did the same with my daughter. You can PM me if you want to discuss in detail.
Good luck.
Want to explore on Caribbean options too. However a question is how can we file for Advance Parole as it requires the applicant to be in US at the time of application, otherwise AOS gets invalid. And if at all we choose her to be here for AP application, it would hinder the education.
Thanks
Venu
AP remains valid for one year and you need to apply for AP in such a way so that for AP renewal your daughter will be in US during vacation etc. In the worst case, she has to fly from Caribbean to Miami (or any nearest US port) just to apply for AP and go back. These are the hassels you need to overcome if you want to send your daughter to MED school without a GC. I did the same with my daughter. You can PM me if you want to discuss in detail.
Good luck.
2010 ocean food chain worksheet.
gk_2000
05-04 01:32 PM
What if you open a company and sponsor your own H1? Ha! That will have a lawyer in knots!
more...
hejilac1224
09-13 03:41 PM
Has you h1b finally been approved? I' m interested to what happened next as I am now on the same situation. Thanks and GL.
hair ocean food chain worksheet.
Vic
10-11 05:14 PM
Thank you all for the prompt responses here - this does show me some light at the end of the tunnel - hopefully its not a train coming down the tunnel towards me :)
Monkeyman - I had sent you a private message regarding the format of the letter that you had used - would it be possible for you to share that letter with me (if you are comfortable doing so).......since I know that it has worked for you.
Monkeyman - I had sent you a private message regarding the format of the letter that you had used - would it be possible for you to share that letter with me (if you are comfortable doing so).......since I know that it has worked for you.
more...
nitkad
04-15 01:17 PM
This tax issue does not seem like part of "All other Green Card Issues" under which it is started.
hot Printable Worksheet
HV000
02-02 03:11 PM
This is one of the political gimmicks employed by the elected reps. during this Election Year!! Ofcourse, citizenship applications represent a vote bank.
more...
house ocean food chain worksheet.
GC08
08-21 07:34 PM
Looks like more chaos has come. Nowadays nothing is working properly. How can they allow a 4 month difference in processing I140 between the 2 centers? What happened in NSC? NSC must have won the imcompetence contest among all those agencies. :-)
tattoo ocean food chain worksheet.
kondur_007
10-16 12:11 PM
I am a July 2nd filer with PD of OCT 2006. I am planning to switch my employer using EAD. Should I notify USCIS with AC21? What is my best option? What is the risk?
I appriciate your help.
Thank you
There are two options here:
1. Document that you are porting using AC 21; keep the documentation with lawyer but do not send it to the USCIS
2. Send the above documentation to USCIS.
The best option for YOU depends on specifics of the case: details of PERM (job title, job description, prevailing wage, location etc), your new job (job title, job description, wage, location, financial stability of the company etc) and your immigration history. (any out of status time etc). This decision is best made by a competent lawyer so that you do not face problems in future.
I will highly advise you to get help from a good and competent lawyer; it's money worth spent.
Good Luck.
I appriciate your help.
Thank you
There are two options here:
1. Document that you are porting using AC 21; keep the documentation with lawyer but do not send it to the USCIS
2. Send the above documentation to USCIS.
The best option for YOU depends on specifics of the case: details of PERM (job title, job description, prevailing wage, location etc), your new job (job title, job description, wage, location, financial stability of the company etc) and your immigration history. (any out of status time etc). This decision is best made by a competent lawyer so that you do not face problems in future.
I will highly advise you to get help from a good and competent lawyer; it's money worth spent.
Good Luck.
more...
pictures ocean food chain worksheet.
HV000
09-17 08:08 PM
Hello all,
I had a question: My and my wife's 485 ND is august 27 from TSC. We haven't got any FP notice yet.
Is anyone in a similar situation? data indicates that most of the august notice dates applicants have already got their FP appointments. I am from NJ so newark must be my ASC.
Should I call USCIS or wait?
Any suggestions are welcomed...
Thanks.
You can call USCIS if you don't receive the FP NOTICE by the end of this month.
I had a question: My and my wife's 485 ND is august 27 from TSC. We haven't got any FP notice yet.
Is anyone in a similar situation? data indicates that most of the august notice dates applicants have already got their FP appointments. I am from NJ so newark must be my ASC.
Should I call USCIS or wait?
Any suggestions are welcomed...
Thanks.
You can call USCIS if you don't receive the FP NOTICE by the end of this month.
dresses ocean food chain worksheet.
Macaca
04-20 06:45 AM
This (http://immigrationvoice.org/forum/showpost.php?p=58962&postcount=630) is how CIR was reported yesterday!
You will know a lot if you follow the News Article Thread!
You will know a lot if you follow the News Article Thread!
more...
makeup FOOD WEB WORKSHEETS FOR KIDS
dixie
10-17 03:13 AM
It means you will be able to get your EAD in a few weeks, based on your ability to file for I-485. The real thing ... well it can take anywhere between 8-9 months to more than 3 years, depending on how quickly FBI completes your name check and how slow or fast the USCIS service center is.
Does a current PD mean you're getting your GC in a few weeks or does it mean "we've started working on it, we'll let you know":)
Thanks!
Does a current PD mean you're getting your GC in a few weeks or does it mean "we've started working on it, we'll let you know":)
Thanks!
girlfriend Pilgrim Food
AjP
May 27th, 2005, 11:11 AM
I absolutely agree with everyone, background need to be more blurry and the guy in upper right corner need to disappear :), try to edit it in Photoshop, may be make background B&W and more blurry or completely replace it, definitely for this type of picture better use lenses with f/1.4-f/2.8 and fill shadows with flash
hairstyles ocean food chain worksheet. i
styrum
01-12 04:34 PM
http://en.wikipedia.org/wiki/Writ_of_Mandamus
asdqwe2k
07-04 04:40 PM
Another possible example here: I heard a case where one labor led to TWO green cards. My understanding this is not possible and might have happened because of the rush USCIS was approving cases.
A friend of mine got 485 approval on June 29th. He was not expecting it to be approved for a specific reason: his company applied his GC using a pre-approved labor. The original labor was with a differnet person who left the company after his 485 was pending for six months (during retrogession time). That person later joined a company and eventually got his 485 approved. Meanwhile the company applied for the I140 withdrawal and simultaneously went ahead applying for I140 and 485 for my friend (he played along since nothing worse going to happen to anyone; and he had a complicated visa situation). They were not hopeful of approval but suddenly they saw the approval on June 29th.
Who knows how many more irregularities happened there during last two weeks.
There is nothing wrong in people getting approvals on july 2nd or for that matter entire this week or this month.. That is because, eventhough people get approval notice e-mails as july 2nd or any date after that, the actual approval happened 2-3 weeks before..
For example, for most of NSC approval in june 18th week, people have indicated that there Green card physical copy showed approval as June 4th. They got approval notice, and actual green cards starting only in June 3rd week. There has been flood of approvals, at least in NSC region.. Just ask any last month GC approved person, to tell what is the date for "Resident Since" on the green card..
A friend of mine got 485 approval on June 29th. He was not expecting it to be approved for a specific reason: his company applied his GC using a pre-approved labor. The original labor was with a differnet person who left the company after his 485 was pending for six months (during retrogession time). That person later joined a company and eventually got his 485 approved. Meanwhile the company applied for the I140 withdrawal and simultaneously went ahead applying for I140 and 485 for my friend (he played along since nothing worse going to happen to anyone; and he had a complicated visa situation). They were not hopeful of approval but suddenly they saw the approval on June 29th.
Who knows how many more irregularities happened there during last two weeks.
There is nothing wrong in people getting approvals on july 2nd or for that matter entire this week or this month.. That is because, eventhough people get approval notice e-mails as july 2nd or any date after that, the actual approval happened 2-3 weeks before..
For example, for most of NSC approval in june 18th week, people have indicated that there Green card physical copy showed approval as June 4th. They got approval notice, and actual green cards starting only in June 3rd week. There has been flood of approvals, at least in NSC region.. Just ask any last month GC approved person, to tell what is the date for "Resident Since" on the green card..
prem_goel
08-15 09:36 AM
would appreciate if any of you experts can share some intelligent thoughts on it...
