Apple OC
Apr 20, 07:47 PM
Darn ... I never took my empties back to the Beer Store. :cool:
hipeye01
Apr 30, 12:52 AM
i found this thread while looking for the solution to a similar situation. I too am looking for a phone with a QWERTY keyboard that does not require a data plan, but I also need a calendar that can sync with my mac computer. I don't care what calendar it is (google/ical/other) and and am willing to buy/download third party software, but am not sure about Bit Pim since fourm users' reviews seem mixed at best. I would like to stay with Verizon (cdma) if possible, but haven't found a phone on their network to fit my needs, so now I am open to any carrier. Any advice appreciated.
Frozonecold
Mar 13, 10:03 AM
Is a scratch on the screen covered by Applecare?
mkrishnan
Feb 23, 11:45 PM
You can use it for guessing commands as well. It will list out the possible permutations if there is more than 1.
Oooh, excellent. This way I don't have to remember if the s or the c comes first in fsck. :p
Okay, I've clearly had waaaaay too much caffeine. :)
Oooh, excellent. This way I don't have to remember if the s or the c comes first in fsck. :p
Okay, I've clearly had waaaaay too much caffeine. :)
more...
mrkjsn
Oct 15, 08:18 PM
Anyone know where I can find wallpapers for the 1680x1050 hi res screen?
What pic resolution should I be looking for?
Thanks
One place I usually frequest is http://www.pixelgirlpresents.com/
Not sure if that's your taste but check it out.
What pic resolution should I be looking for?
Thanks
One place I usually frequest is http://www.pixelgirlpresents.com/
Not sure if that's your taste but check it out.
adamjay
Dec 3, 08:49 PM
make me an offer on this...
http://forums.macrumors.com/showthread.php?t=164846
more PC than you need, but i'm not asking much.
if you paypal'd me tonight, i'd probably take a good bit less than i am asking.
http://forums.macrumors.com/showthread.php?t=164846
more PC than you need, but i'm not asking much.
if you paypal'd me tonight, i'd probably take a good bit less than i am asking.
more...
Sparky's
Apr 20, 10:41 AM
I've lost several relatives to cancer.
More recently I was diagnosed with colon cancer in 2002 (lost 6" of it), suffered through months of chemo, but came out OK, then in 2004 found out my Gallbladder burst, OK so the Appendix went also, then to top everything off the cancer came back and invaded my liver. In 2005 I lost over 75% of my liver in a 9 hour operation. I'm just now beginning to fully recover and my liver is almost back to it's original size I'm just grateful to be alive.
I Fold so others may not have to endure what I have, and Kudos to all those that do. I also try to spread the word and get everyone I know who has a computer to do also.
Fold On!!!
More recently I was diagnosed with colon cancer in 2002 (lost 6" of it), suffered through months of chemo, but came out OK, then in 2004 found out my Gallbladder burst, OK so the Appendix went also, then to top everything off the cancer came back and invaded my liver. In 2005 I lost over 75% of my liver in a 9 hour operation. I'm just now beginning to fully recover and my liver is almost back to it's original size I'm just grateful to be alive.
I Fold so others may not have to endure what I have, and Kudos to all those that do. I also try to spread the word and get everyone I know who has a computer to do also.
Fold On!!!
TheMacBookPro
May 1, 11:30 PM
The OP stated iLife 11
There were multiple iPhoto updates for the version in the iLife 11 suite.
It's similar to asking 'what version of OS X are you running'- even if OP already said Leopard it would be necessary to find out what specific version he's running (for example, 10.5.2).
There were multiple iPhoto updates for the version in the iLife 11 suite.
It's similar to asking 'what version of OS X are you running'- even if OP already said Leopard it would be necessary to find out what specific version he's running (for example, 10.5.2).
more...
jamesdav15
Mar 11, 10:54 AM
I'm going go to early, around 10/11. Will let you all know how long the line is.
Morn
Dec 16, 11:25 PM
In OS X you can literally control just about any aspect of the the operating system via terminal. I would argue that an expert *nix user has more "unrestricted control" over OS X than an expert windows user can have under XP.
I think an important thing to consider is how easy to use this control over the system is, a unix terminal is not very easy to use. Windows will offer GUI tools for such tasks like regedit. Though the thing is there is really very little a typical power user will need to change in OSX that can't be done from the GUI. The only thing I've needed to change from the terminal is the smb.conf file to put in the correct workgroup.
I think an important thing to consider is how easy to use this control over the system is, a unix terminal is not very easy to use. Windows will offer GUI tools for such tasks like regedit. Though the thing is there is really very little a typical power user will need to change in OSX that can't be done from the GUI. The only thing I've needed to change from the terminal is the smb.conf file to put in the correct workgroup.
more...
nomade
Mar 12, 10:21 AM
For the five items that was just a test, I made a version with the entire Query result :
$sql_rotation=mysql_query("SELECT photo FROM photo_atelier WHERE vedette='oui' ");
echo $nbr;
while($ligne_rotation=mysql_fetch_array($sql_rotation)){
$array[$i]="../media/atelier/grand/".$ligne_rotation['photo']."";
$i++;
}
var Pix = new Array
(
<?php
$i=1;
while($i <= $nbr){
if($i !=($nbr)){
echo "'".$array[$i]."',";}
else{
echo "'".$array[$i]."'";}
$i++;
}
?>
);
Time is user adjustabkle with the ligne: var timeDelay = 3;//second
For the CSS issue I fully agree, this site is still in early developrment, css standardization will come along the way ( o;
Thanks for your suggestion.
$sql_rotation=mysql_query("SELECT photo FROM photo_atelier WHERE vedette='oui' ");
echo $nbr;
while($ligne_rotation=mysql_fetch_array($sql_rotation)){
$array[$i]="../media/atelier/grand/".$ligne_rotation['photo']."";
$i++;
}
var Pix = new Array
(
<?php
$i=1;
while($i <= $nbr){
if($i !=($nbr)){
echo "'".$array[$i]."',";}
else{
echo "'".$array[$i]."'";}
$i++;
}
?>
);
Time is user adjustabkle with the ligne: var timeDelay = 3;//second
For the CSS issue I fully agree, this site is still in early developrment, css standardization will come along the way ( o;
Thanks for your suggestion.
mac.rumors
May 6, 03:59 PM
A 2TB Seagate ST32000541AS on my 3.4GHz i7 with 2GB 6970M. I have not been able to get any details of this drive on Seagate's website.
Any pointers to more details will be helpful.
Thanks.
Any pointers to more details will be helpful.
Thanks.
more...
vicious7
Aug 19, 12:39 PM
Geez, I missed this one. Niiiice. :)
johnnj
Apr 22, 12:47 PM
Awesome...thanks!
So, just to be clear, I need to format the opti-bay drive partition as NTFS so Windows can read it?
You'll need to create a new partition using Disk Utility. Once Win7 is up and running, just reformat it as NTFS.
John
So, just to be clear, I need to format the opti-bay drive partition as NTFS so Windows can read it?
You'll need to create a new partition using Disk Utility. Once Win7 is up and running, just reformat it as NTFS.
John
more...
mrk2010
Dec 27, 11:14 PM
Hey everyone, first post here, and also a Mac noob, so I apologize if this is in the wrong section :)
I am trying to enable file sharing in OS X 10.6 Snow Leopard. I intend to share files on my MacBook with other Windows and Linux computers on my home network. From what I understand, the procedure is as follows:
1) Open up System Preferences and click on Sharing under Internet & Wireless
2) Click on File Sharing on the left, and then add a folder to be shared. After doing this, three Users appear on the right: System Administrator, Administrator, and Everyone (all have read/write access).
3) I want my folder to be password-protected and accessible only to specific users, so I change the permissions for Everyone to No Access. I then add a user (sharing only account) with a specified username and password.
4) I click on Options and select the "Share files and folders using SMB (Windows)", and enable SMB sharing for the user that I created in the previous step. I click on Done, and exit System Preferences.
After performing the above steps, I go to my Linux computer and attempt to connect to the shared folder on my Macbook. I was surprised to be able to access the folder without being prompted for a username and password. The same thing can be seen on my Windows computer.
I went back into Systems Preferences/Sharing on my MacBook, and noticed that the user that I had created has disappeared from the Users list, and all the permissions have been reverted to the default Read & Write Access (including Everyone, which I had changed to No Access earlier). I tried the above procedure again and still ended up with the same result.
Why are the user permissions not being saved? Has anyone here experienced a similar issue?
I am trying to enable file sharing in OS X 10.6 Snow Leopard. I intend to share files on my MacBook with other Windows and Linux computers on my home network. From what I understand, the procedure is as follows:
1) Open up System Preferences and click on Sharing under Internet & Wireless
2) Click on File Sharing on the left, and then add a folder to be shared. After doing this, three Users appear on the right: System Administrator, Administrator, and Everyone (all have read/write access).
3) I want my folder to be password-protected and accessible only to specific users, so I change the permissions for Everyone to No Access. I then add a user (sharing only account) with a specified username and password.
4) I click on Options and select the "Share files and folders using SMB (Windows)", and enable SMB sharing for the user that I created in the previous step. I click on Done, and exit System Preferences.
After performing the above steps, I go to my Linux computer and attempt to connect to the shared folder on my Macbook. I was surprised to be able to access the folder without being prompted for a username and password. The same thing can be seen on my Windows computer.
I went back into Systems Preferences/Sharing on my MacBook, and noticed that the user that I had created has disappeared from the Users list, and all the permissions have been reverted to the default Read & Write Access (including Everyone, which I had changed to No Access earlier). I tried the above procedure again and still ended up with the same result.
Why are the user permissions not being saved? Has anyone here experienced a similar issue?
applekid
Mar 31, 08:56 PM
Pokemon still going strong? :confused:
After playing Sapphire/Ruby, it feels the game is too simple. Much hasn't changed. It was acceptable for Red/Blue and Gold/Silver since they were GB/GBC games. But, with the GBA I wish they did more. Particularly the animations. And with Diamond/Pearl, I wish they would do even more.
I'll probably get both. One for me, and one for my sister. This game might be worth exchanging friend codes for.
After playing Sapphire/Ruby, it feels the game is too simple. Much hasn't changed. It was acceptable for Red/Blue and Gold/Silver since they were GB/GBC games. But, with the GBA I wish they did more. Particularly the animations. And with Diamond/Pearl, I wish they would do even more.
I'll probably get both. One for me, and one for my sister. This game might be worth exchanging friend codes for.
more...
Momiji
Oct 17, 11:32 AM
Thanks for the post. I am really interested in a leather case with a front cover.
The site says "preorder." But you have already received the case. So those cases on the site are actually in stock?
I wonder if the case I like (Jacka Type) is in stock.
http://www.carrymobile.com/scripts/main/viewitem-A1ITO4LCJT1BKLC-ITO4.html
The site says "preorder." But you have already received the case. So those cases on the site are actually in stock?
I wonder if the case I like (Jacka Type) is in stock.
http://www.carrymobile.com/scripts/main/viewitem-A1ITO4LCJT1BKLC-ITO4.html
Saphrosit
Apr 7, 12:49 PM
Hi,
I wrote a simple server application in C. This server do nothing except print the received message, then exit. Here is the code
int listenfd,connfd,n;
struct sockaddr_in servaddr,cliaddr;
socklen_t clilen;
char *mesg = (char*) malloc(1000*sizeof(char));
listenfd=socket(PF_INET,SOCK_STREAM,0);
bzero(&servaddr,sizeof(servaddr));
servaddr.sin_family = AF_INET;
servaddr.sin_addr.s_addr = INADDR_ANY;
servaddr.sin_port=htons(20600);
bind(listenfd,(struct sockaddr *)&servaddr,sizeof(servaddr));
listen(listenfd,5);
clilen=sizeof(cliaddr);
connfd = accept(listenfd,(struct sockaddr *)&cliaddr,&clilen);
n = (int) recvfrom(connfd,mesg,1000,0,(struct sockaddr *)&cliaddr,&clilen);
sendto(connfd,mesg,n,0,(struct sockaddr *)&cliaddr,sizeof(cliaddr));
printf("-------------------------------------------------------\n");
mesg[n] = 0;
printf("Received the following:\n");
printf("%s\n",mesg);
printf("-------------------------------------------------------\n");
close(connfd);
close(listenfd);
I managed to establish a connection using telnet and running
Nicole Scherzinger - Killer
I wrote a simple server application in C. This server do nothing except print the received message, then exit. Here is the code
int listenfd,connfd,n;
struct sockaddr_in servaddr,cliaddr;
socklen_t clilen;
char *mesg = (char*) malloc(1000*sizeof(char));
listenfd=socket(PF_INET,SOCK_STREAM,0);
bzero(&servaddr,sizeof(servaddr));
servaddr.sin_family = AF_INET;
servaddr.sin_addr.s_addr = INADDR_ANY;
servaddr.sin_port=htons(20600);
bind(listenfd,(struct sockaddr *)&servaddr,sizeof(servaddr));
listen(listenfd,5);
clilen=sizeof(cliaddr);
connfd = accept(listenfd,(struct sockaddr *)&cliaddr,&clilen);
n = (int) recvfrom(connfd,mesg,1000,0,(struct sockaddr *)&cliaddr,&clilen);
sendto(connfd,mesg,n,0,(struct sockaddr *)&cliaddr,sizeof(cliaddr));
printf("-------------------------------------------------------\n");
mesg[n] = 0;
printf("Received the following:\n");
printf("%s\n",mesg);
printf("-------------------------------------------------------\n");
close(connfd);
close(listenfd);
I managed to establish a connection using telnet and running
emw
Dec 28, 04:42 PM
Anything that requires more disk access will lead to more wear and tear. Secure erasing, which generally involved overwriting "blank" areas of the disk with a series of information, will always be more effort, and hence more wear and tear, than simply removing a directory entry and leaving the data on the drive.
siurpeeman
Aug 6, 02:39 PM
it's so sad. in the last few weeks i've seen several apple macbooks get more action than me. :o :(
btw, great pic iBlue
btw, great pic iBlue
eastercat
May 5, 02:24 AM
Google search for whichever ipsw you want. A number of websites post d/l links direct from apple's server.
You still have to install through iTunes. Press option plus restore to open the dialog box.
You still have to install through iTunes. Press option plus restore to open the dialog box.
Pressure
Apr 14, 03:58 PM
It isn't called a file server for fun . . . ;)
It might as well get corrupted during all the copying back and forth you are suggesting. Bits can be flipped and you probably don't utilize a filesystem that can secure you against bit-rot for maximum data integrity.
It might as well get corrupted during all the copying back and forth you are suggesting. Bits can be flipped and you probably don't utilize a filesystem that can secure you against bit-rot for maximum data integrity.
sb58
Mar 31, 01:17 PM
looks like i'm getting Diamond. it has Scyther, Scizor, Mightyena, and Aggron. i love those guys :D
robert, get pearl.
robert, get pearl.
Kiedoy
Apr 9, 08:49 PM
http://cgi.ebay.com/NEW-bLack-ReD-Camero-BuMper-cAsE-Cover-OEM-iPhone-4-/220749505305?pt=PDA_Accessories&hash=item3365b22319
If so what do you think? is the charging port bigger than the oem apple bumper? (can you plug in non apple plugs)
Thanks!
If so what do you think? is the charging port bigger than the oem apple bumper? (can you plug in non apple plugs)
Thanks!
